There are various methods that can be used to seal the threaded adapters that may come with the boiler. This post shows three effective methods to get that first joint tight. However, it is also possible to get an effective seal without the adapters by using 7 wraps of Teflon tape (we like Monster brand), then applying pipe dope over the Teflon, or by using Loctite 55 for that first joint.
1. Hemp and Paste
The Loctite video below shows both the Loctite product and the hemp-and-paste method side by side. We stock the hemp-and-paste product if you prefer that method.
2. Loctite 55
Loctite 55 can easily be purchased on Amazon or eBay. It is not typically found in North American plumbing supply stores.
3. Bonded Seals
This method is very easy. Simply push the washer-like seal over the threads and turn the adapter in until it bottoms out and becomes tight. The joints from that point on can be sealed with your favorite method, such as Teflon tape.
These bonded seals can be purchased from the Discounthydraulichose.com website. Search for the part on their website.
Four bonded seal sizes are needed for the various threaded ports found on the boiler and tanks.
If you plan to use the built-in cooling coil, you will need a special thermostatic valve. These are the adapters for the copper cooling coil connection. The thermostat valve is purchased separately.
Originally published: October 2022