Viking Bio 35 Pellet Burner
The Viking Bio 35 pellet burner head is designed to attach to many of the Vedolux boiler models by using an adapter kit.
- Burns steadily without smoke puffs
- Automatically adjusts for increased or decreased demands
- Safety default feature if boiler or chimney are blocked
- Combustion efficiency of 92%
- Output of 75k – 120k Btu/h
- Weighs only 33 pounds
The burner detects increases and decreases in demand. Based on that demand it regulates the pellet feed to control output. This feeding method results in high efficiency and low waste.
The Viking Bio is safe
When starting, the Viking Bio checks that the boiler and chimney are not blocked. If it detects a problem, the burner will not start. The flame is monitored by a photo-electric cell. If the burner fails to start for some reason, it automatically extinguishes the smoke gasses out of the boiler before stopping.
On all of Varmebaronen’s boilers, the heat absorbing surfaces of the boiler tubes are easy to reach with a flue brush (included with boiler purchase). It only takes about a minute to clean the tubes. The soot falls down into the boiler’s combustion chamber an can be swpt up or vacuumed out with the ash.
The burner ventilates both itself and the boiler when starting up. This ignition process eliminates the risk of smoke gases collecting and igniting with explosive force. The flame slowly builds up until full ignition is achieved.
Attaching the burner head
The Viking Bio pellet burner, its electrical connections and the pellet feeder tube are secured to the front of the boiler with easily accessed quick-release fasteners. This allows the burner to connect and disconnect from the boiler in just seconds! The burner is also light and easy to carry.
The only moving part in the burner is the fan. All parts exposed to heat are manufactured from stainless steel.